Starting to sew – SINGER W102 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

STARTING TO SEW

When starting to sew, the

thread take-up lever must be

at its highest position to

prevent the needle from

becoming unthreaded.

Hold the free end of the

upper thread lightly and turn

p¡g/ ~

^ ’

the hand wheel towards you until the lower thread comes up.

Pull the ends to the back, being sure that the upper thread goes

down, through and under the presser foot. Place material under the

presser foot.

Lower the presser foot.

Start the machine and guide the material by letting the machine feed

itself.

Do not pull on the material.

Do not run the machine unless there is material under the presser

foot.

Do no, run the machine with

the presser foot raised.

Fig. l(i