Replacing bobbin case, Straight sewing – SINGER W102 User Manual

Page 22

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

REPLACING BOBBIN CASE

Hold bobbin case by grasping latch with thumb and forefinger of left

hand. Fig. 21.

Place bobbin case on hook or shuttle pin. Close latch by pushing it

until it clicks into place.

Fig. 21

STRAIGHT SEWING

Use long stitches for heavier materials-increasing in length as weight

of material increases.

Use shorter stitches for lighter weight materials-very short for thin

or sheer materials to avoid seam puckering.

NOTE: Do not pull or hold back on the material, but guide it only.

(Pulling or holding back on the material-in addition to

forming uneven stitches-will break or bend the needle).