Priss-o-matic regulator – SINGER W102 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

PRiSS-O-MATIC REGULATOR

The Press-o-matic controls the pressure of the presser foot on the

material and can be regulated to exert normal pressure when pressed

down all of the way. . .or regulated to eliminate all pressure if the

outside ring (Fig. 12) is pressed to permit the presser bar (Fig. 13)

to raise about three-quarters of an inch. If you attempt to sew

without pressure, the material must be moved by hand.

When sewing on thin or sheer materials set the presser bar to

number 2 or number 3 position. . .all the way down for normal or

heavy material.

Fig. 12

Fig. 13