SINGER 114W110 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Oil should then be applied at each of the places designated
by arrows in Figs. 2, 3, 4 and 5. When the machine is in continu
ous use it should be oiled at least once each day.
E 36b0
F
ig
. 4. ]0
ni
) V
iew
of
the
M
achine
, S
howing
O
iling
P
oints
Fig. 2 shows the front plate of the machine removed for the
purpose of cleaning and oiling. The front plate can be removed
after taking out the thumb screw which holds it in position.
Fig. 4, above, shows the face plate of the machine removed
for the purpose of cleaning and oiling. The face plate can be
removed after loosening the thumb screw (B, Fig. 4).
Turn the machine back on its hinges and apply oil at the
places shown by arrows in Fig. 5 and all other places where
F
ig
.
5
.
O
iling
1’
oints
in
the
B
ase
of
the
M
achine
there ai’e parts in movable contact, then bring the machine
forward into place.
Needles
Needles for Machine 114 w 110 are of Class and Variety
126
X
1 and are made in sizes Nos. 8, 9, 10, 12, 14, 16, 18, 20,
22, 23, 24 and 25.
The size of the needle to be used should be determined by
the size of the thread which must pass freely through the eye of
the needle. If rough or uneven thread is used the successful
operation of the machine will be interfered with.
Orders for needles must specify the quantity required, the
size number, also the class and variety numbers separated by the
letter
X.
The following is an example of an intelligible order:
“100 No. 12, 126 x 1 Needles.”
The best results will be obtained in using the needles furnished
by the Singer Sewing Machine Company.