SINGER W761 User Manual

Page 25

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Leave the presser foot down, drop the feed to

"E"

and take five or six stitches to close the buttonhole.

Stop the machine with the needle out of the fabric, but do not raise the foot.

Return stitch width to 0 and take two or three stitches, which will fasten the bar threads and prevent

ravelling.

Cut the buttonhole opening with the seam ripper, being careful not to cut the stitching.

If you plan to make buttonholes on sheer or soft material, place tarlatan or paper, which can be torn

away after stitching, under the fabric. And it is always wise to make several buttonholes on scraps

of fabric before working on the garment.

Fig.

(

)