SINGER W761 - Manual (Page 15)

Preparing to Sew
Hold the end of the upper thread loosely and revolve
hand wheel toward you slowly until loop of bobbin
thread (Fig. 24) is drawn up through the needle holp.
Draw both threads to the right (Fig. 25 1 and under
presser foot toward back of machine.
Fig25
Fig. 24
Removing the Work
Stop machine w'ith take-up at its highest point. Raise
presser foot. Pull fabric toward back of machine,
keeping thread in presser foot slot to avoid bending the
needle. Hold both threads taut and cut on thread
cutter, leaving machine thread ends about four inches
long. Never operate the machine when it is threaded
unless there is material under the presser foot.
( 12 )
CO o
o