Step, Sing the c, Ontrols – Maytag MAH-3 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

*siNG THE C
ontrols
Step
%
Press the arrow pad to select the Soil Level/washing time.
Heavy - Use for cleaning heavily soiled loads.
Mediom - Use for cleaning moderately soiled loads.This setting will be appro
priate for most loads.
Light - Use for cleaning lightly soiled loads.
Control features vary by model.
Heavy
■ Medium
Light
Soil Level
Step
Press the appropriate pad(s) to select one or more options.The indicator light
above the pad will illuminate when the option is selected.
Delay - Any cycle can be delayed for up to 9, I 2 or 19 hours {select models) in
one hour increments.
1. Hake the appropriate selections for your load.
2. Press the Delay pad until the desired delay time appears
in the display.
3. Press the Cycle Selector dial.The delay time will
start counting down.
4. To cancel a delay, press the Power Off pad and restart.
■
I
Delay )
■ . High
•
Low
. Off
Chime - Press the Chime pad to increase or decrease the end of cycle signal
volume or turn the signal off.
Control Lock - The washer controls can be locked to prevent
unwanted use by children.
1. Press the Wash/Rinse Temp and Spin Speed pads at the same time
for three seconds.
2. The Control Lock light will illuminate.
3. To unlock, press the Wash/Rinse Temp and Spin Speed pads at the
same time for three seconds. The Control Lock light will go out.
Chime
Wash/ Rinse Temp Spin Speed
Auto Terrip Conti'ci
cont.