Step, Sing the c, Ontrols – Maytag MAH-3 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

^siNG THE C
ontrols
Step
Control features vary by model.
Super
Push Dial to
Start / Pause
► II
Select the appropriate cycle for the type of load.
This will determine the tumble pattern and spin speed for the cycle.
NOTE: To minimize wrinkling of loads, select the Wrinkle Control cycle.
Sanitary {select models) - For heavily soiled, colorfast garments.
This cycle heats the water to IS0°F to eliminate bacteria.
NOTE; If Pause is selected during the heating portion of the Sanitary Cycle, the
: washer door will remain locked for your safety.
Super Wash - For sturdy, colorfast fabrics and heavily soiled garments.
Normal - For most fabrics including cottons, linens and normally soiled garments.
Whites (select models) - For white fabrics with or without bleach.
Wrinkle Control - For “wash and wear” and synthetic fabrics and lightly to normally
soiled garments.
Colors {select models) - For bright fabrics or fabrics that may bleed.
Délicates - For sheer fabrics, bras and lingerie.
Hand Wash - For wool, silk and other hand-wash-only fabrics.
For best results, use liquid detergent.
Quick Wash - For lightly soiled or wrinkled garments needed quickly.
Enviro Plus (select models) - For geographic areas where energy and water conserva
tion is needed.