The set of hemmers, Darning spring – SINGER W7013 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

28
THE SET OF HEMMERS
Before attaching any of the hemmers, be sure bobbine
thread
IS
pulled
up.
Then,
with
hemmers
in
place,
hold
top
thread
loosely
and
turn
handwheel
one
full
turn toward you, making a loop under hemmer. Grasp
bobbin
thread
with
both
hands
and
slip
horizontally
under
hemmer
toward
back.-bobbin
thread
will
catch
loop and carry upper thread to back of hemmer.
Fig. 36
Fold material for two inches along edg, hold at each end of fold. Slip fold in to gmde and
up over spoon vFrg, 36V Fold hem m me.er.al back of hemmer. Draw forward to end of hem
and fasten with point of needele. Pull on threads gently as you start st.toh.ng,
DARNING SPRING
HOW TO ATTACH.
Remove presser foot, unthread needle, place darner spring, on
needle and slip hook up over needle clamp.
Fig. 37