Attachment foot, The edgestitcher – SINGER W7013 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
24
ATTACHMENT FOOT
In order to attach the binder, edgestitcher and the
hammers, it is necessry to remove the presser foot and
replace it with the attachment foot. Fig. 26.
Mount
binder, edgestitcher or hemmers sliding the
attachment to the left as for as possible and tigten
scr© w.
The mounting slot enables you to sew as close to
or as far away from the edge as desired. Just move the
attachment to the correct position before tightening the
mounting screw.
Fig. 26
THE EDGESTITCHER
The edgesticher is used in mak
ing lace insertions, edgings and pip
ings.
The
slots
serve
as
guides.
To
sew lace edging to fabric, place the
material you want on top of slot, Fig.
27, and the other piece in slot 4. Fig.
28.
To trim with a wide piping, place
-
28
the fabric in slot 4, and the fold of
. .
f=Hrir in slot 2 and the folded
the piping to the left in slot 3, for a narrow piping, place the fabric, in slot ^ a
edge of the piping to the right in slot 3.
t
. u
Slot 5 may be used as a guide in stitcing a French beam.