The adjustable cording and zipper foot – SINGER W7013 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
27
THE ADJUSTABLE CORDING AND ZIPPER FOOT
' i
This attachment is used to make and
insert covered cording, and to sew in
zippers.
Losen
thumb
screw
to
slide
foot to either right or left of needle.
CORDING. Fold bias strip of fabric
over
cord.
Loosen
thumb
screw
and
set
foot
so
needle
is
centered
in
needle hoole. Machine baste cord in
place (.Fig. 34).
,
To sew covered cord to material, reset adjustable foot so needle stitches closer to cord, and
on edge of base fabric.
Fig. 34
SEWING IN A ZIPPER
Fig. 35
Loosen
thumb
screw
and
slide
foot
so
needle
enters
center
of
needle
hole.
Guide
metal
of
zipper
along
edge of foot (Fig. 35'.
Stitching should be close to zipper to allow easy open
ing and closing. Adjust to sew from either right or
left side, whichever is more convenient.