Installing sewing head in cabinet, Talli^ sewing head, Ni cabmet – SINGER W816 User Manual
Page 57
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLING SEWING HEAD IN CABINET
55
1
.
Back off both head hinge set screws
until head hinge hole Is clear.
2.
Tilt head hinge tongues up and back
as far as they will go.
3.
Carefully slip head onto head hinges
- - making sure tongues are inserted
as
far
as
they can go into head
hinge holes.
4.
Allow the head to rest In its tilted-
back position.
5.
Tighten
both
set
screws
securely
with screw driver.
6.
Plug
electrical
leads
into
sockets
located
inside
cabinet.
Cord
identi
fied
with“iTiPtor” tag
must be plugged
into sockot marked
“motor"
Untagged cord goes to “light”
socket. ..................... ,
, ,
See Fig. 99
BACK OFF
SET SCREW
TO CLEAR
HINGE
LIFT FLAP
TO LOWER
HEAD INTO
CABINET
Fig. 99
HEAD HINGE
HOLES
HEAD HINGES
HINT: STRETCH
A RUBBER BAND
ACROSS THE TWO
HINGES TO HELP
HOLD THEM UP
RIGHT WHILE
MOUNTING THE
SEWING HEAD.