Cuing, Change as follows, Change – SINGER W816 User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

“CUING

For straight aarving an fine fabric

or verv aaft 'Ti-naria!, it Is advis*

abie to use the straight stitch press

ard

tho

straight

stitch

nee

dle plate %vhich arelncJatJsdin your

^uccassoiy box. Boih have narrow

nsedie slots. '

CHANGE

AS FOLLOWS

C1 ) Presser Foot

(A)

Loosen thumb screw (18, Fig. 1 ) and remove zigzag presser foot.

U3) Replace with straight stitch presser foot (Fig. 23).

(A) Slitia covBr plate

(16,

Fig. 1 ) to the front as far as possibis.

(B) Remove screws holding needle plate (15, Fig. 1 ) to bed plate.
(C) Remove zigzag needle plate.

(D) Replace with straight stitch needle plate (Fig. 22-B).

Fig. 23