Threading the bobbin case – SINGER W816 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

THREADING THE BOBBIN CASE

Step 1 (illustrated in Fig. 9). Hold bobbin case between thumb and forefinger of left

hand, so that the slot In the edge of the bobbin case is on top, take the bobbin between

thumb and forefinger of right hand so that the thread on top leads from left to right.

Step 2 Insert bobbin into bobbin case, pull the thread into the slot of the bobbin case

as shown in Fig. 10, and draw it under the tension spring and into the fork-shaped open
ing of the spring as shown in Fig.

1 1 .

TENSION SPRC-

Fig. 10

Fig. 11