Adjusting pressure and feeding of fabric, Feed, Sure – SINGER W816 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Fig. 15

Fig. 16

Fig. 14

Fig. 17

Fig. 18

ADJUSTING PRESSURE AND FEEDING OF FABRIC

General Sewing. Usually for normal sewing the pressure bar cap or

darner release, (B, Fig. 18) is at its lowest position and the drop

feed

knob is turned to. "High” position, Fig. 19.

Sewing Thin or Light Weight Fabrics. When lighter pressure is re

quired to sew satisfactorily on thin silk or flimsy material, the pres

sure

cap should be about halfway down. Release ail the way by

pressing the snap lock, (A, Fig. 20), and then press cap (B) down

again to halfway spot. Lower the feed slightly by turning the black

i&i on t’:S Itnols to "Low” position. " '

^ ^ ^

Fig. 19