Creative embroidery, Im'ftlumli – SINGER W816 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
23
CREATIVE EMBROIDERY
Be sure aig^eag press«, foot and »iga=ag needle plate are in place.
1. Set decorative stitch control (B, Fig. 24)at “M”
position.
2.
Set needle position control at “L” position.
f l l l l M k
'im'ftlumli
Fig. 27
3. With the zigzag width control (C, Fig. 24) set at the Number 5 and stitch length
control (E, Fig. 24) as near 0 as possible without stopping the feeding action, a satin
stitch is produced (Fig. 27)
4.
With the machine set fora short stitch length, different designs can be made by
turning the zigzag width control back and forth between 0 apd 5 or any other
combinations of widths. Try setting the zigzag width control at (C, Fig. 24) the
first line and the various other lines.
Set a rhythm for yourself and then proceed.
After awhile you will become quite skillful, vary
ing your designs by the speed of the machine,
stitch
length
and
manipulation
of
the
zigzag
width control.
Fig. 28