When threading looper thread hole (7) > (d – SINGER 14U285B User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
• To thread the chainstitch looper
(4) Threading for chainstitch
Open looper cover. Thread chainstitch looper in the order (f) to (9) as shown. (Purple thread
path)
While holding thread with finger, pass it
between the tension discs and pull thread
down to make certain it is properly
located in between the tension discs.
when threading looper thread hole (7) > (D •
• Draw about 5 cm (2 inches) of thread from
the looper thread hole.
(5) To thread the chainstitch needle
Thread the chainstitch needle thread in the order (T) to (9) as shown. (Blue path)
While holding thread with finger,
pass it between the tension discs
and puli thread down to make
certain it is properly located in be
tween the tension discs.
• Use tweezer to thread eye
d ) .
• Draw about 5 cm (2 inches)
of thread from needle eye.