Machine maintenance, Oiling the machine, Cleaning the machine – SINGER 14SH644 User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
24. MACHINE MAINTENANCE
An overlook requires more maintenance than a
conventional machine mainly due to two reasons.
1) A lot of lint is produced due to the cutting action
of the knives.
2) An overlook runs at a very high speed and needs
to be oiled frequently to lubricate the internal
working parts.
[ Cleaning the Machine
A
Danger:
•\ Before cleaning your machine, disconnect
power line plug from the wall receptacle.
Clean the lint from the looper and knife area often
with a dry lint brush.
Note: Lint brush is an optional part.
[ Oiling the Machine
A
Danger:
Before lubricating your machine, disconnect
power line plug from the wall receptacle.
The oiling points shown in the diagram, should be
oiled periodically.
Note: Use sewing machine oil. Do not use any
other oil or damage could result.
42