Howto remove and insert needles, How to remove and insert needles – SINGER 14SH644 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
10. HOWTO REMOVE AND INSERT
NEEDLES
[ To Remove Needle(s)
A
Caution :
Be sure to disconnect the machine from the
electric outlet before removing needle(s).
Turn the hand wheel toward you until the needle is
at its highest position.
Loosen, but do not remove the needle set screw
with the small screwdriver.
1 Left needle set screw
2 Right needle set screw
3 Left needle
4 Right needle
Remove the needle(s).
To Insert Needle(s)
A
Caution :
, Be sure to disconnect the machine from the
electric outlet before replacing needle(s).
Hold the needle with the flat surface to the back.
Insert the needle into the needle clamp as far as it
will go.
Securely tighten the needle set screw.
Note: *This machine uses #2022 needles. Refer
to page 17 for additional needle
information.
* Remove the cloth plate if you find it difficult
to remove and replace the needle.