How to sew a rolled hem, Machine set up – SINGER 14SH644 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
22. HOW TO SEW A ROLLED HEM
• This machine can sew four types of rolied hems.
• Rolied hemming is done by rolling and overedging
the fabric edge.
• Light weight fabrics such as lawn, veil, organdy,
crepe, etc. perform the best.
• Rolled hemming is not suited for heavy or stiff
fabrics.
Machine Set Up
Remove the left needle.
Move seam width finger knob to setting R . (See
page 27)
Align left face of seam width finger support plate
with R mark on throat plate by turning seam width
finger knob, as required.
Set stitch length diat to “F' 2” and a fine seam will
be sewn.
Needle: Singer Needle #2022 size 80/11 or 90/14
Thread; A variety of thread combinations can be
used for rolled hemming.
A
CO
bi
J
--------------- ' ^
i-----
____
in
1
1 bl—
a
33