SINGER 1036 Creative Touch User Manual

Page 34

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Adjusting Width of Button Opening

The width of the button opening is regulated

by the stitch-width dial.

• To make button opening wider, turn dial very

slightly toward the 1 setting.

• To make button opening narrower, turn dial

very slightly toward the 2 setting.

Adjusting Width of Button Opening

Adjusting Length of Button Opening

The length of the button opening in one-step

buttonholes is controlled by the button-carrier
clamp. If the button will not pass through the
button opening of your test buttonhole, remove
the button from the carrier and slide clamp for
ward to a new setting. Use the gauge lines (Ve

inch apart) on the carrier to set length and

stitch buttonhole without a button in the car

rier.

Gauge
Lines

Button
Carrier
Clamp

Adjusting Length of Button Opening
When Using One-step Foot

This manual is related to the following products:

1036