SINGER 1500 Izek - Manual (Page 44)

CUSTOM
Some of the bars may not reproduce correctly when sewn,
carry out a test sewing first. so it is recommended that you
^oooo^ MENU
PATTERNS
BUnONHOLES
LETTERS
FflUORITES
► CUSTOM
COLORS
Use the ( C o n t r o l Pad to select
“CUSTOM".
Push the A Button
2
3
CUSTOM
/ 7
- 1
\
- 1 y
- 1 / \
/
On the custom screen B Button
works as both deleting a bar and
returning the cursor to the bar
screen. Use the Control Pad to
select a desired bar (there are 30
different types of bars, and up to 20
can be used in a single pattern).
Push the A Button
The selected bar will be displayed on
the working screen. Use the Control
Pad to move it to desired position.
Selected bar can be shifted vertically
and horizontally using the Control Pad.
Push the A Button
To continue to use the same type of
bar, push the Control Pad to create bar
and shift the bar to desired position, and
push the A Button to determine the
position.
To change a bar,
Push the B Button ( D
The cursor will return to the bar
screen, so use the Control Pad to
select the desired bar, and then
Push the A Button
NOTE: If the B Button is pushed
while selecting bars, screen will be
returned to MENU.
Repeat the steps in screen 3 and 4
to create the pattern.
NOTE: If you should place bars in
an inappropriate position, warning
is given with beep sound. In this
case, shift the bar a little pushing
the Control Pad.
One previously
determined bar
can be deleted.
To delete a last bar which has been
X -------------
e ®
The cursor will return to the bar
screen, use the Control Pad to
select , and then
Push the A Button
■ All bars can be deleted.
When design work is finished.
Push the B Button
( ^ ®
Use the Control Pad to select" E" to
complete design work.
Push the A Button
CUSTOM
► UNIT OF
PATTERN
SERIES OF
PATTERN
Use the (^) Control Pad to select
unit or series of pattern, and then
Push the A Button
UP TO 20 BARS
GAN BE USED
when creating patterns
Up to 20 bars can be added
to a single pattern. To leave
this screen, press A Button or
B Button to return to the
previous screen, and use the
Control Pad to select “ E" and
then Push the A Button.