Set-up guide screen, Turn on power switch, Set thread spool – SINGER 1500 Izek User Manual
Page 23: Thread bobbin turead, Pick up bobbin turead, Place fabric under presser foot, Safety device, Picking up bobbin thread
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SET-UP GUIDE SCREEN
m
ivm-
CONNECT GAME BOY
e
EE CONNECTION OF
RME BOV IN MONUOL
Screen operations: Use the Control Pad ( ^ • ▼ ) to move
the cursor.
Advance to the next screen.
Return to the previous screen.
End.
TURN ON POWER
SWITCH
SEE SETTING UP THE
MACHINE IN MANUAL
SET THREAD SPOOL
THREAD BOBBIN
TUREAD
SEE THREADING
BOBBIN IN MANUAL
PICK UP BOBBIN
TUREAD
SEE PICKING UP
THRERD IN MANUAL
PLACE FABRIC UNDER
PRESSER FOOT
SEE TEST SEWING
IN MANUAL
Above screen appears
when buttonholing
SAFETY DEVICE
This sewing machine is equipped with a safety device which
senses if the thread gets tangled up with the hook during
sewing, and automatically interrupts the flow of current within
3 seconds to stop the motor from operating when such a
problem occurs.
If this safety device has operated, turn off the power for the
sewing machine and eliminate the cause of the problem that
caused the sewing machine to stop.
Then, turn the hand wheel toward you to check that the sewing
machine works normally again, and then re-start the machine.
Error message when the foot controller Is connected'
Push the A Button
A
CHECK
FLASHING AREA
FOOT CONTROL
CONNECTED
This message will be displayed if you
push the start/stop switch when the
foot controller is connected.
Press the foot controller to
start sewing.