SINGER 1500 Izek - Manual (Page 32)

10
Use the ( ^) Control Pad to
select “END”.
Push the A Button
®
11
COMBINATIONS
1^-k
h.
t'-i
► DfiTfl TRANSFER
ADD TO FADORITTS
RETURN
-*■ ■ NW- S; w. ■ ‘ j ' • vx?C':.' •<.*■'
Push the A Button
12A
COMBINATIONS
SEE SET-UP GUIDE?
—YES
► NO
Use the (Y) Control Pad to
add the stitch pattern to your
favorites (refer to page 31), or
to return to the previous
screen.
___If you do not wish to view
the set-up guide screen.
Push the A Button
DATA TRANSFERRED.-
1 3
(COMBINATIONS)
I
(PATTERNS)
COMBINATIONS
k:
TRANSFERRED
START
SEWING MACHINE
start the machine.
COMBINATION
sewing sample
At the desired location, stop the
sewing machine.
1 5
RE-START TO CONTINUE]
5EWING
_ If you wish to view the set-up guide screen, push
the ( A ) Control Pad to select "YES".
Push the A Button
1 2 B - 1
>)>
Push A Button to change the
size of each pattern.
___ “ADD TO FAVORITES”,
see page 31.
Push the (^) Control Pad
I to select “E”. (end sewing)
Push the A Button
CONNECT POWER PLUG
SEE SETTING UP THE
MnCHINE IN MRNURL
Push the A Button
“SET-UP GUIDE SCREEN’
see page 21.
1 2 B - 2
Push the A Button
DATA TRANSFERRED.
► MODIFY
ADD TO FAUORITI
RETURN
Push A Button to return to
screen 3 (page 29).
------ Error message during setting-up ------------------
If the sewing machine is not set up
correctly, the above message will be
displayed when starting the machine.
1. Push A Button.
2. The error message will be
displayed. Fix the problem
following the instructions in the
message. (Refer to page 67.)
3. When the error has been cleared,
screen 13 will be displayed.
4. Start the machine.
* The start/stop switch on the sewing machine will flash red for
2 - 3 seconds and will then change to green. However, the
sewing machine will not start again until the cause of the error
has been properly cleared, even if you try to start the machine,
so make sure that you clear the cause of the error properly.
CHECK FLASHING
AREA AND START
SEWING MACHINE