Cisco OL-12997-01 - Manual (Page 10)

Chapter B Setting Up and Using a Cisco Unified IP Phone as a Cisco IPICS Push-to-Talk Device
Using the Cisco IPICS Service on a Cisco Unified IP Phone
B-10
Cisco IPICS Server Administration Guide
OL-12997-01
Step 3 Enter your digit ID and digit password (PIN); then, press the Submit softkey.
If more than one channel or VTG is assigned to you and activated for your use,
Cisco IPICS displays the list of these channels and VTGs. In this case, continue
to
Step 4 .
If only one channel or VTG is assigned to you and activated for your use, it
becomes active automatically. In this case, go to
Step 5 .
Step 4 To participate in a channel or VTG, use the Navigation button to scroll to the
channel or VTG in which you want to participate; then, press the Select softkey.
When you choose a channel or VTG, it becomes active on your Cisco Unified IP
Phone.
Step 5 To talk on the channel or VTG, press and hold the PTT softkey.
If you want to latch, or lock in, the channel or VTG, press the Latch softkey on
the Cisco Unified IP Phone. You can disengage the latch by pressing the Stop
softkey. (On some phone models, you must press the More softkey to see Latch.)
Step 6 When you are done talking, release the PTT softkey to return to listen-only mode.
Step 7 When you are done using the Cisco IPICS service, take one of these actions:
• If the Logout softkey appears, press that key. On some phone models, you
must press the More softkey to see Logout.
• Press the Back softkey and then press the Logout softkey.