Canon B150 - Manual (Page 98)

FAX PRINTER
Factory settings are in bold. For instructions on how to change a setting, refer to How to change a
setting, pp. 81, 82.
Name Description Settings
PAPER SIZE Select the size of the loaded fax paper. A4/LEGAL/LTR
RX REDUCTION Enable/disable reduction for received faxes. ON/OFF
REDUCTION RATE Set the reduction factor in percent. STANDARD/A4
→
LTR/LGL
→
LTR
SEL. REDUCE DIR Select reduction in width only or both width and height. VERTICAL ONLY/HORIZ &
VERTICAL
PRT DIRECTION Select between unidirectional and bi-directional printing. BI-DIRECTION PRT/PRT ONE
DIRECT.
SYSTEM SETTINGS
Factory settings are in bold. For instructions on how to change a setting, refer to How to change a
setting, pp. 81, 82.
Name Description Settings
UN/LOCK PHONE Restricts sending with a password.
PASSWORD Allows you to set a four digit password to restrict access to
the LOCK PHONE setting below.
LOCK PHONE Allows you to restrict sending. ON/OFF
AUTO TEST PRINT Enable/disable auto test printing whenever the BJ cartridge
is replaced. ON/OFF
DATE FORMAT Set the date format. MM/DD/YY
DD/MM/YY
YY/MM/DD
DISPLAY LANGUAGE Set the language of the LCD messages. ENGLISH/FRENCH/SPANISH/
GERMAN/ITALIAN/DUTCH/FINNISH/
PORTUGUESE/NORWEGIAN/
SWEDISHDANISH/SLOVENE/
CZECH/HUNGARIAN
TX START SPEED Set the speed at which the fax starts transmitting. Set this
to a lower speed if you have difficulties connecting over
long distance or noisy lines. 14400bps/9600bps/7200bps/
4800bps
RX START SPEED Set the speed at which the fax starts receiving. Set this to a
lower speed if you have difficulties connecting over long
distance or noisy lines. 9600bps/7200bps/4800bps
SETTINGS AND ACTIVITY REPORTS
86