Assembly, Y checklist – Sears 917.251551 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ASSEMBLY
y CHECKLIST
BEFO RE YO U O PERATE AND ENJO Y YO UR NEW
TRA CTO R, W E W ISH TO ASSURE THA TYO U RECEIVE
THE BEST PERFO RM ANCE AND SA TISFACTIO N FRO M
THIS Q UALITY PRO DUCT.
PLEASE REVIEW THE FO LLO W ING CHECKLIST:
/ All assembly instructions have been completed,
/ No remaining loose parts in carton.
/ Battery is properly prepared and charged. (Minimum
1 hour at 6 amps).
/ Seat is adjusted comfortably and tightened securely.
/ All tires are properly inflated. (For shipping purposes,
the tires were overinflated at the factory).
/ Be sure mower deck is properly leveled side-to-side/
front-to-rear for best cutting results. (Tires must be
properly inflated for leveling).
/ Check mower and drive belts. Be sure they are routed
properly around pulleys and inside all belt keepers.
/ Check wiring. See that all connections are still secure
and wires are properly clamped.
W HILE LEARNING HO W TO USE YO UR TRACTO R,
PA YEXTRA A TTENTIO N TO THE FO LLO W ING IM PO R
TANT ITEM S:
/ Engine oil is at proper level.
/ Fuel tank is filled with fresh, clean, regular unleaded
gasoline.
/ Become familiar with ail controls - their location and
function. Operate them before you start the engine.
/ Be sure brake system is in safe operating condition.
10