Sears 917.25559 - Manual (Page 14)

CUSTOMER RESPONSIBILITIES
MAINTENANCE SCHEDULE
FILL IN DATES
AS YOU COMPLETE
REGUUR SERVICE
0:
SERVICE DATES
Check Brake Operation ✓ |/ 1
Check Tire Pressure
✓
✓
T
Check for Loose Fasteners ✓
¥
R
Д
Sharpen/Replace Mower Blades ✓ *4
M c
Lubrication Chart |/
✓
T Check Battery Level/Recharge
✓
0 Clean Battery and Terminals ✓
R
Check T ransmission Cooling ✓
Adjust Blade Beit(s) Tension |/
Adjust Motion Drive Belt(s) Tension
¥
Check Engine Oil Level И ✓
Change Engine Oil |/ 1^2.3
✓
I E
Clean Air Filter ✓ s
IN Clean Air Screen .
G Inspect Muffler/Spark Arrester
✓
I
I
Replace Oil Filter (If equipped)
IN
F
Clean Engine Cooling Fins |(/ 2
Replace Spark Plug
¥
Replace Air Filter Pape- Cartridge |/г
Replace Fuel Filter
1 ■ Change mofs often when operating under a heavy load or in high ambient temperatures. 3
2 - Service more often when operating In dirty or dusty conditions. 4
GENERAL RECOMMENDATIONS
The warranty on this vehicle does not cover items that have
been subjected to operator abuse or negligence. To
receive full value from the warranty, operator must main­
tain unit as instructed in this manual.
Some adjustments will need to be made periodically to
properly maintain your unit.
All adjustments in the Service and Adjustments section of
this manual should be checked at least once each season.
• Once a year you should replace the spark plug, dean
or replace air filter, and check blades and belts for
wear. A new spark plug and dean air filter assure
proper air-fuel mixture and help your engine run better
and last longer.
BEFORE EACH USE
• Check engine oil level,
• Check brake operation.
• Check tire pressure.
• Check for loose fasteners.
- If equipped with oil filter, change oil every 50 hours.
- Replace blades more often when mowing in sandy soil,
LUBRICATION CHART
(D spindle zerk
(if equipped)
(DFRONT WHEEL
BEARING ZERK
SPINDLE ZERK®
(If equipped)
FRONT WHEEL®
BEARING ZERK
ENGINE®
14
©ATTACHMENT CLUTCH PIVOT
©CHECK/ADD
PUMP FLUID
Ф SAE 10W30 MOTOR OIL API - SG
@ GENERAL PURPOSE GREASE
® REFER TO
CUSTOMER RESPONSIBILITIES "ENGINE“ SECTION
IMPORTANT: DO NOT OIL OR GREASE THE PIVOT POINTS
WHICH HAVE SPECIAL NYLON BEARINGS. VISCOUS LUBRI­
CANTS WILL ATTRACT DUST AND DIRT THAT WILL SHORTEN
THE LIFE OF THE SELF-LUBRICATING BEARINGS. IF YOU
FEEL THEY MUST BE LUBRICATED, USE ONLY A DRY, POW­
DERED GRAPHITE TYPE LUBRICANT SPARINGLY.