Sears 315.10924 - Manual (Page 5)

OPERATION
AWARNING' YOUR SAW SHOULD NEVER BE CONNECTED TO POWER SUPPLY WHEN YOU ARE
assembling parts making adjustments , assembling or removing blades , or when not
IN USE UNPLUGGIN^^ SAW WILL PREVENT ACCIDENTAL STARTING THAT COULD CAUSE
SERIOUS INJURY.
AWARNING- DO NOT ALLOW FAMILIARITY WITH YOUR SAW TO MAKE YOU CARELESS. REMEMBER
^AT A CARELESS FRACT^^ OF A SECOND IS SUFFICIENT TO INFLICT SEVERE INJURY.
FEATURES
Features include easily operated bevel cut and depth
of cut adjustment mechanisms; directed air flow for
keeping line of cut clear; and blade wrench storage.
Before attempting to use your saw, familiarize
yourself with all operating features (See Figure 1)
and safety requirements.
SWITCH
Your saw is equipped with a “lock-off" switch which
reduces the possibility of accidental starting. You
must depress the button on top of the handle in
order to be able to pull the trigger switch. The lock
resets each time the trigger is released.
If any parts are missing do not operate your saw until
the missing parts are replaced.
Make sure power supply is 110-120 volts, 60 HZ, AC
only.
Page 5