Sears 790.93754 - Manual (Page 9)

Oven Control Functions
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar
with the various functions of the oven as described below.
OFF/CANCEL PAD— Used to clear any
function previously entered except the time of
day and minute timer. Push OFF/CANCEL to
stop cooking. Also the OFF/CANCEL pad is
used to activate oven door lockout setting.
.i*'.
UP and DOWN ARROW PADS— Used along with the
function pads to select oven temperature, cook time,
stop time {when programming an automatic stop time),
time of day, clean time and minute timer.
_____________________________ \_______________________________
BAKE PAD—Used to
select the bake
function.
BROIL PAD—
Used to select the
variable broil
function.
CLEAN PAD— Used to
select the self-cleaning
cycle.
; 00« t I COOK
Í SET t Í TIKE
msm
: €LmM :
«Í mEmM
i 'V' Í
IB Ì
• DOmUJCffiD ... "Ili, ........
STOP
TME
CLOCK SET PAD—
Used to set the time of
day.
FEATURE INDICATOR
LIGHTS— These light
to show which feature
is in use.
COOK TIME PAD— Used
to enter the length of the
baking time (if equipped).
STOP TIME PAD— Used
to set the desired stop
time for baking. Can be
used with COOK TIME to
program a delayed bake
cycle (if equipped). —
OVEN, PREHEAT & DOOR LOCKED LIGHTS — The "OVEN" light will glow each time
the oven turns on to maintain the set oven temperature. The "PREHEAT" light will glow
when the oven is first set to operate, or if the desired temperature is reset higher than the
actual oven temperature. The "DOOR LOCKED" light will flash when the oven door
locks and unlocks or when using the self-clean cycle or the oven door lockout mode is
activated. The indicator light will glow constantly after the door locks.
TIMER ON/OFF PAD— Used to set or
cancel the minute timer. The minute
timer does not start or stop cooking.
Also,
TIMER ON/OFF pad is used to set
the Continuous Bake feature.
The oven can be programmed to: BAKE, TIME BAKE, BROIL, SELF-CLEAN, CONTINUOUS BAKE
and set for OVEN LOCKOUT.
For a silent control panel
When choosing a function, a beep wiil be heard each time a pad is pressed. If desired, the controls can be programmed for
silent operation. Press and hold [^]. After 7 seconds, the control will beep once. This will block the controls from sounding
when a pad is pressed. To return the sound, press and hold again for 7 seconds until the control beeps once.
Note: The control will return to the audible mode after a power outage.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (65°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press "---------------- " appears in the display.
2. Press and hold the until "HI" appears in the display.
3. Press and hold until °F or °C appears in the display.
4. Press the or "V to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating mode.