Using your cordless handset – Clarity E814CC User Manual

Page 46

1. Press

twice, then use the keypad to edit the number

if necessary,

2. Press

and use the keypad to enter the name
3. Press to save.

To Delete a Redial Number

Follow the steps in the section under “Review the redial list entry”.
While reviewing a number in the redial list, press to delete the selected
entry. A confirmation tone sounds.

Find the Handset
You can use the handset locator feature to find misplaced handsets.

To start the paging tone

1. Press on the telephone base. All the registered handsets will ring, and the

** Paging** is flashing on handset screen.

To stop the paging tone

1. Press , , or any dial pad key (0-9 *, or #) on

the handset(s).

–OR–
2. Press on the telephone base or put the handset in the telephone base

or charge.

make an internal Call
This feature is only applicable when there are at least two registered handsets. It allows
you to make internal calls, transfer external calls from one handset to another handset
and make conference calls.

Intercom Another Handset

1. In idle mode, press

, then to select Intercom.
2. Press .
If you have two handsets, your handset screen shows “calling other handset”. The
other handset rings and its screen shows “other handset is calling”.
If you have more than two registered handsets, your screen shows “intercom to:”
Use the dial pad keys to select the other handset. Your handset screen shows “calling

using your CorDless HanDseT