Clarity E814CC - Manual (Page 25)

25
4. Press to confirm; display briefly shows “Saved”, then it returns to
previous menu
set the key Tone
The Key Tone is a confirmation beep when you press any key. It is set on by default, but
can be turned off, if desired.
In Idle:
1. Press and to select Settings.
2. Press and to select Key Tones.
3. Press and to select On or Off.
4. Press to confirm; display briefly shows “Saved”, then it returns to
previous menu.
set the Home area Code
In Idle:
1. Press and to select Settings.
2. Press and to select Home area code.
3. Use numeric keypad to enter your local 3-digit area code.
4. Press to confirm; display briefly shows “Saved”, then it returns to
previous menu.
set the Voicemail access number (in speed Dial location “1”)
In Idle:
1. Press and to select Settings.
2. Press and to select Voicemail #.
3. Use numeric keypad to enter the Voicemail access phone number (separate service,
available from your local phone service provider).
4. Press to confirm; display briefly shows “Saved”, then it returns to
previous menu.
note:
You can now access your Voicemail service by press-and-holding key “1” on your
numeric keypad.
using your CorDeD Base