Clarity E814CC - Manual (Page 24)

24
set the Base language
In Idle:
1. Press and to select Settings.
2. Press to seLect Lcd LanGUaGe.
3. Press to confirm the setting; display shows Saved, you will hear a
beep; display goes back to the previous menu.
rinGer setUP
Change ringer Volume and Tone
1. Press and to select Ringers.
2. Press ; display shows Ringer Volume.
3. Press <UP/down> to select the ringer volume that best suits your needs; phone
rings to indicate current level.
note: If ringer volume is OFF, display shows the ringer off icon.
1. Press to save; display shows Saved, then returns to previous screen.
2. Press button to go to Ringer Tone; press to
change the ringer tone.
3. Press button to scroll through the ringer tone list (from Tone 1 to
Tone 10).
4. Press to confirm the setting; display shows Saved, you will hear a
beep; display goes back to the previous screen; press to return
to previous menu.
note: The respective ringer melody will be played during your selection.
set the Dial mode
You should normally leave the dialling mode at its default setting of TONE (also called
DTMF) unless the phone is connected to an old exchange that only recognizes
PULSE dialling.
In Idle:
1. Press and to select Settings.
2. Press and to select Dial mode.
3. Press and to select TONE or PULSE.
using your CorDeD Base