Using your corded base – Clarity E814CC User Manual

Page 21

4. Display shows “Entries in DIR” briefly, then displays the first entry in alphabetical

order; press to select the desired entry to be deleted.

5. Press < X > and display shows “Delete contact?”.
6. Press to confirm or to cancel.

assign speed Dials
Your corded base has 9 speed dial available, corresponding to keys “0, 2-9” on your
numeric dial pad. When these speed dial locations are set up, you can dial these numbers
by press-and-holding the numeric key. For example – to dial the number set up in speed
dial 4, press and hold key “4” for 2 seconds. To set up the speed dial buttons, you must
first add that number/contact to the directory.

In idle:

1. Press , then or to select Directory;

press to enter the directory menU.

2. Press to see Speed dial.
3. Display shows the first speed dial location, 0; press or to

see aLL avaiLabLe Locations. the avaiLabLe (not yet
set) Locations wiLL show ; the set Loca-
tions wiLL show the name of the contact. Press menU> to seLect a sPeed diaL Location.

4. Display shows “Copy from DIR”, followed by the first entry in your directory. Use

or to select the entry you wish to assign to your speed dial
location; press to seLect the entry.

5. You can further edit this entry if needed; press to confirm.
6. You will hear a confirmation beep when finished, display returns to the Speed Dial list
of records.
note:

You can reassign Speed Dial locations - follow steps above and choose the Speed Dial

you want to change; display shows “Reassigning SD”; press

to confirm.

note:

Speed Dial “1” is reserved for Voicemail access (separate features, available from

your local phone service provider”. See section

Phone settinGs for setting up Voice-

mail speed dial and for directions on how to clear the voice mail icon.

using your CorDeD Base