Clarity E814CC - Manual (Page 31)

31
4. Press and to select your desired recording time
from the available options 1 min, 2 min (default), 3 min.
5. Press to confirm; display shows Saved.
set the outgoing message language
The answering machine announces the outgoing message when it answers a call. There is
a pre-set OGM for each of ANS & REC mode or ANSWER ONLY mode. You are able
to select your desired OGM language to playback.
1. Press and to select Answering sys.
2. Press and to select Ans sys setup.
3. Press and to select Voice language.
4. Press and to select your desired language.
5. Press to confirm; display shows Saved.
Turn on or off the Call screening
You can select to turn on or off the call screening on base.
1. Press and to select Answering sys.
2. Press and to select Ans sys setup.
3. Press and to select Call screening
4. Press and to select ON or OFF.
5. Press to confirm; display shows Saved.
Change remote access code
Your phone lets you check your messages or operate your answering machine by
calling the answering machine when you are away from home and the Remote Access
is turned on.
1. Press and to select Answering sys.
2. Press and to select Ans sys setup.
3. Press and to select Remote code.
4. Press and use the numeric keypad to enter a new 2-digit remote
access code.
5. Press to confirm; you will hear a confirmation beep.
using your CorDeD Base