Clarity E814CC - Manual (Page 16)

16
answer a Call
When there is an incoming ring, pick up the corded handset or press Phone> to answer the call.
end a Call
During a call connection, put the corded handset on the base station to end the call. Or
press if you have a call in hands free mode.
adjust earpiece and Hands free Volume
During a call, you can adjust the earpiece volume from a selection of 5 volume levels
(Level 1 to Level 5). If you are in a speakerphone mode, you can choose the speaker
volume from a selection of 5 volume levels (Level 1 to Level 5).
During a call:
Press to increase or decrease the volume level respectively. The
current setting is shown. When you end the call, the settings will remain at the last
selected level.
Boost
During a call, you can activate the booster function with the volume of earpiece
increased by several dBs by pressing , “boost” displays on the screen.
To cancel it, press again.
mute a Call
You can talk to someone nearby without letting the caller hear you during a call.
During a call:
Press to mute the microphone and “MUTED” is displayed on
the LCD. Your caller cannot hear you. Press again to unmute the
microphone. “MUTED” is disappeared and the display will show “LINE IN USE”.
memory keys
There are 5 memory keys (from M1 to M5) on the corded base for you to store frequent
use numbers. After a number is stored in any of these memory keys, you can simply
press once on one of these memory keys to dial out to the number stored in it directly.
store a number into a memory key
1. In idle mode, enter the telephone number you want to store.
using your CorDeD Base