Clarity E814CC - Manual (Page 22)

22
caLLer disPLay (networK dePendent)
This feature is available if you have subscribed the Caller Line Identification service with
your network service provider. Your phone can store up to 10 received calls with date/
time information in the base CID. The number will be shown on the LCD when the
phone is ringing. If the number matches with one of the entries in your Private Directory,
the caller’s name stored in the private directory will be displayed with the number.
If the caller number is disabled to send caller information, “WITHHELD” will display.
If the caller number is not provided, “OUT OF AREA” will display.
If you’ve got new Caller Display records, the base will have “NEW X” on its display,
where X is the number of new calls.
View the CiD
All unanswered calls are saved in calls log with the latest call putting at the top of the list.
When the CID is full, the oldest call will be replaced by a new call. The unanswered call
which has not been read is marked with icon and the number of new calls is
shown at the top right of the screen.
1. Press and to select Caller ID log.
2. Press twice to review the entries; display shows the most
recent entry.
3. Press to review the List of entries.
note:
In idle, you can press to see the most recent record in the missed CID
list directly.
4. Press > to scroll through the CID list.
note:
The icon will be displayed in the idle screen until all new calls have been
reviewed in the CID list.
store a CiD number into the Directory
1. Follow steps from 1 to 3 in section View the CID.
2. Press to seLect the record to be stored; the
record will now be edited before being saved to your directory.
3. Display shows “Edit number”; key in the number using the digit keys (maximum 20
digits) OR press if no chanGes are needed. If you
make any mistakes, press to backspace a digit. Press
or to insert characters.
using your CorDeD Base