Outside, Plan view, Radius fascia – Flex FLE Roof Edge User Manual

Page 8: Lfacij

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

RADIUS FASCIA

MEASUREMENT INSTRUCTIONS

1. Using the 36" straight edge provided, set it against the wall (as illustrated).

2. Using the 12" rule provided, measure the distance (rise) from the edge of the yardstick at the

18" mark straight in to the face of the parapet.

3. Repeat steps 1 and 2 in several more areas along the arch. Record these measurements in the

boxes provided. We will calculate the radius from these measurements.

NOTE!

If the measured rise dimensions vary by

" or over, call Engineering Dept, at

800-558-2162 for further instructions

4. Fill in the general information below and fax this sheet back to 610-916-9501,

¡OUTSIDE^

RISE

OUTSIDE

LfACij

PLAN VIEW

NOTE! INDICATE PROPER RADIUS CONDITION BY

CIRCLING APPROPIATE OUTSIDE FACE.

PROJECT:

ARCHITECT:

ROOFING CONTRACTOR:

REPRESENTATIVE/DISTRIBUTOR:

Customer Service:
Phone: 800-969^0108
Fax:610-916-9501

DATE: 12/03/10

DRN BY: JJC

CKD BY: SAK

SHT.# OF

DWG# 28510-3438

p: 800-969-0108

f: 610-916-9501

detail