Digital radio / dab operations – Clarion XDZ716 User Manual

Page 14

XDZ716

Digital Radio / DAB Operations

Note: Be sure to read this chapter referring to the front diagrams of chapter “3.CONTROLS” on page 5 (unfold).

DAB control function

When a CeNET cable is used to connect a DAB
(DAH913) (sold separetely), all functions can be
operated.

Listening to the DAB station

1. Press FNC button

to select DAB mode.

2. When the unit receives a DAB station, the

display changes in the following order:

Frequency channel

➜

service label

Switching displays

Press the DISP button for 1 second during the
Main (service label) display to select Main (ser-
vice label) or Sub (PTY).

Note:
• The display shown in the normal reception mode

and the preset reception mode is the same when
a DAB station is received.

3. When the unit does not receive a DAB station,

the display changes in the following order:

–Normal reception mode–

–Preset reception mode–

Notes:
• The number of programmes and broadcasting

times depend on the DAB stations.

• When the strength of DAB signals is weak, audio

output is muted.

Selecting a P.EQ menu

1. Press A-M button

and select “P.EQ”. “P.EQ”

blinks in the display.

2. Press BND button

to select “BASC” (ba-

sic). “BASC” is displayed in the operation
status indication

in the display.

3. Press one of Direct buttons

and select the

desired P.EQ menu.

∗

To select the user memory, press BND button

to select “USR” and press one of Direct

buttons

Editing/storing a P.EQ menu (User
memory)

1. Select a P.EQ menu which you want to edit

on the basis of.

2. Press and hold ADJ button

for 1 second or

longer.

3. Press the right or left side of SEARCH button

to select the item to be adjusted.

There are correction channel, correction band,
selection of the centre frequency, gain adjust-
ment and selection of the Q-curve available
for the items to be adjusted.

∗

For details on each adjustment item, refer to the
owner’s manual supplied with the DPH910.

4. Turn the Rotary knob

(

clockwise or counter-

clockwise to make the adjustment.

5. Repeat steps 3 to 4 to complete the adjust-

ment and press ADJ button

6. Press and hold one of Direct buttons

for 2

seconds or longer to store the edited contents.

∗

You can give a title to the user memory. For
the inputting method of titles, refer to the
subsection “Entering titles” in section “Opera-
tions common to each mode”.

AC Processor Operations

Seek tuning

1. Press FNC button

to select DAB mode.

2. Press and hold right or left for 1 second or

longer using SEARCH button

∗

“SEEK” appears in the display.

3. “DAB” lights up in the display when the main

unit receives a DAB station.

∗

The main unit stops the seek tuning when it
cannot find a DAB station. The display returns
to the previous mode.

Manual tuning

1. Press FNC button

to select DAB mode.

2. Press and hold BND button

for 1 second or

longer. “MANU” lights up in the display.

3. Press the right or left SEARCH button

select a station.

∗

If no operation is performed for more than 7
seconds, manual tuning is cancelled and the
display returns to the previous mode.

Switching programmes

1. Press FNC button

to receive a DAB station.

2. Press the right or left SEARCH button

switch programmes in the DAB station.

Note:
• The programme name may be the same depending

on DAB programmes.

Programme scan

This function scans through each receivable
programme in a DAB station being received for
10 seconds sequentially. This is useful when you
want to search for a desired programme.

1. Press FNC button

to receive a DAB station.

2. Perform the following operation depending on

the connected model.

Press SCN button

. “SCAN” lights up and

the unit starts scanning each programme for
10 seconds sequentially. Each time the main
unit scans, the programme name is shown in
the display.

3. To stop programme scan when a desired

programme is tuned in.

Press SCN button