Professional mode/vse operations, Professional mode/p.eq operations, Std mode/dsf operations – Clarion XDZ716 User Manual

Page 13

XDZ716

Editing/storing a sound field menu
(User memory)

1. Select a sound field menu which you want to

edit on the basis of.

2. Press and hold ADJ button

for 1 second or

longer.

3. Press the right or left side of SEARCH button

to select the item to be adjusted.

There are “EFFECT”, “DELAY”, “REAR MIX”,
“REV.TIME” or “ROOM SIZE” and “HIGH” or
“LIVENESS” available for the items to be ad-
justed.

∗

For details on each adjustment item, refer to the
owner’s manual supplied with the DPH910.

4. Turn the Rotary knob

(

clockwise or coun-

terclockwise to make the adjustment.

5. Repeat steps 3 to 4 to complete the adjust-

ment and press ADJ button

6. Press and hold one of Direct buttons

for 2

seconds or longer to store the edited contents.

∗

You can give a title to the user memory. For
the inputting method of titles, refer to the
subsection “Entering titles” in section “Opera-
tions common to each mode”.

Professional mode/VSE operations

Note:
• The adjustment made in professional mode is not

reflected in the adjustment in standard mode. On
the contrary, the adjustment made in standard
mode is not reflected in the adjustment in
professional mode.

VSE effect ON/OFF

While the “VSE” indication

is lit in the display,

the VSE effect is set to “ON”.

∗

The factory default setting is “ON”.

1. Press A-M button

and select “VSE”.

2. Press DISP button

3. Press A-M button

. “VSE” in the display lit

or unlit.

∗

When “VSE” is unlit, the VSE effect is set to
OFF.

Note:
• If the VSE effect is set to OFF, the adjustment

made in “VSE operations” is not reflected in the
music source.

AC Processor Operations

Selecting an VSE menu

1. Press A-M button

and select “VSE”.

2. Press BND button

to select “BASC” (ba-

sic). “BASC” is displayed in the operation
status indication

in the display.

3. Press one of Direct buttons

and select the

desired VSE menu.

∗

To select the user memory, press BND button

to select “USR” and press one of Direct

buttons

Editing/storing an VSE menu (User
memory)

1. Select an VSE menu which you want to edit

on the basis of.

2. Press and hold ADJ button

for 1 second or

longer.

3. Press the right or left side of SEARCH button

to select the item to be adjusted.

There are “DIFFUSE”, “CAR WIDTH” and “CAR
LENG” available for the items to be adjusted.

∗

For details on each adjustment item, refer to the
owner’s manual supplied with the DPH910.

4. Turn the Rotary knob

(

clockwise or counter-

clockwise to make the adjustment. The adjust-
ment range is from 1 to 10 for each item.

5. Repeat steps 3 to 4 to complete the adjust-

ment and press ADJ button

6. Press and hold one of Direct buttons

for 2

seconds or longer to store the edited contents.

∗

You can give a title to the user memory. For
the inputting method of titles, refer to the
subsection “Entering titles” in section “Opera-
tions common to each mode”.

Professional mode/P.EQ operations

P.EQ effect ON/OFF

While the “P.EQ” indication

(

is lit in the dis-

play, the P.EQ effect is set to “ON”.

∗

The factory default setting is “ON”.

1. Press A-M button

and select “P.EQ”.

2. Press DISP button

3. Press A-M button

. “P.EQ” in the display is

changed from blinking to lit or unlit.

∗

When “P.EQ” is unlit, the P.EQ effect is set to OFF.

Note:
• If the P.EQ effect is set to OFF, the adjustment

made in “P.EQ operations” is not reflected in the
music source.

AC Processor Operations

G.EQ effect ON/OFF

While the “G.EQ” indication

is lit in the dis-

play, the G.EQ effect is set to “ON”.

∗

The factory default setting is “ON”.

1. Press A-M button

and select “G.EQ”.

2. Press DISP button

3. Press A-M button

. “G.EQ” in the display lit

or unlit.

∗

When “G.EQ” is unlit, the G.EQ effect is set to
OFF.

Note:
• If the G.EQ effect is set to OFF, the adjustment

made in “G.EQ operations” is not reflected in the
music source.

Selecting a G.EQ menu

1. Press A-M button

and select “G.EQ”.

2. Press BND button

to select “BASC” (ba-

sic). “BASC” is displayed in the operation
status indication

in the display.

3. Press one of Direct buttons

and select the

desired G.EQ menu.

∗

To select the user memory, press BND button

to select “USR” and press one of Direct

buttons

Editing/storing a G.EQ menu (User
memory)

1. Select a G.EQ menu which you want to edit

on the basis of.

2. Press and hold ADJ button

for 1 second or

longer.

3. Press the right or left side of SEARCH button

to select the frequency to be adjusted.

There are 50Hz, 100Hz, 200Hz, 400Hz, 1kHz,
3kHz and 12kHz available for the adjustment
frequency.

∗

For details on each adjustment item, refer to the
owner’s manual supplied with the DPH910.

4. Turn the Rotary knob

(

clockwise or counter-

clockwise to make the adjustment. The adjust-
ment range is from –6 to 6.

5. Repeat steps 3 to 4 to complete the adjust-

ment and press ADJ button

6. Press and hold one of Direct buttons

for 2

seconds or longer to store the edited contents.

∗

You can give a title to the user memory. For
the inputting method of titles, refer to the
subsection “Entering titles” in section “Opera-
tions common to each mode”.

STD mode/DSF operations

DSF effect ON/OFF

When the “DSF” indication

is lit in the display,

the DSP effect is set to “ON”.

∗

The factory default setting is “ON”.

1. Press A-M button

and select “DSF”.

2. Press DISP button

3. Press A-M button

. “DSF” in the display lit

or unlit.

∗

When “DSF” is unlit, the DSF effect is set to OFF.

Note:
• If the DSF effect is set to OFF, the adjustment

made in “DSF operations” is not reflected in the
music source.

Setting the listening position menu

1. Press A-M button

and select “DSF”.

2. Press the right or left side of SEARCH button

to set the listening position type.

There are FULL SEAT, FRONT-R, FRONT-L,
FRONT (only front seats), REAR (only rear
seats) and PASS available for the listening
position types.

∗

The factory default setting is “FULL SEAT”.

Making fine adjustment of the
listening position

1. Upon completion of setting the listening

position, press ENT button

2. Press the right or left side of SEARCH button

to select “BALANCE” or “FADER”. The

selected item blinks.

3. Turn the Rotary knob

(

clockwise or counter-

clockwise to adjust the balance and the fader.

4. Press ENT button

to return to the DSF

mode.

Selecting a sound field menu

1. Press A-M button

and select “DSF”. “DSF”

blinks in the display.

2. Press BND button

to select “BSC1” (ba-

sic-1) or “BSC2” (basic-2). “BSC1” or “BSC2”
is displayed in the operation status indication

in the display.

3. Press one of Direct buttons

and select the

desired sound field menu.

∗

To select the user memory, press BND button

to select “USR” and press one of Direct

buttons