I how ro usi, Picn rb:-ln-pic, Pip) f – Philips MX2797B User Manual

Page 42: Katuri

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

□I

How ro Usi:

Tui:

Picn Rb:-lN-Pic

1 1

: (PIP) F

katuri

icture-in-Picture (PIP) is the

showing of two pictures on the

TV screen at the same time. (One

main screen picture and one small
inset picture - or PIP). For your
ease and convenience this TV has
two separate inputs (ANTenna A
and ANTenna B)for your home’s

Antenna andlor Cable TV system

signal.

The ANT A input is primarily for
the TV’s main screen picture. The

ANT B input is provided as a

second, dedicated source option

for the TV’s PIP “window” and its
feature operations. The signal

connected to the ANT B input can
be either a Split Signal Input (as
described in the section on this

page), or another type of external

signal source (such as a satellite
dish system, additional home
antenna, video accessory, etc.).

See the following steps on how
channels connected to the

ANT(enna) B Input can be shown

and used within the PIP window:

Connect your Antenna or

Cable TV signal to the single 75
ohm INPUT plug on a two-way
Signal Splitter (not supplied).

Connect two lengths of RF
Coaxial Cable (F-type connectors
on both ends) to the two OUTPUT
plugs on the two-way Signal
Splitter.

<|> Connect the twin OUTPUT

plugs on the Signal Splitter to the

ANT A and ANT B Inputs on the
rear of the TV.

continue to next page

For other possible PIP

connections see page 48 for

the "More PIP Connections"
section.

If you need any accessories or

parts to complete the described
PIP connections, contact your
dealer, or our Parts hiformation
Center at (1-800-292-6066), for
details.

• MAIN SCREEN-

Display signal supplied
primarily through
ANT A Input on tear
of TV.

-PIP WINDOW-

Display signal supplied

primarily through ANT

B Input on tear of TV.

BACK OF TV

Comblnadon VHFAIHF Antenna

ANTfenna) B

Input

OPTIONAL TWO-

WAY SIGNAL

(single 7Sohm Input to twin 73 ohm Outputs -
optional RF Coaxial connecting cables also
requited)

Note: The purpose of the ANT B Input is to
provide an easily connected, dedicated picnire
soutce for PIP feature use. Other signal source
options (such as a satellite dish system, additional
external antenna, VCR, or Video Game) could also
be ctmnected and displayed on the TV’s PIP screen
window through the use of the ANT B input.

Round Cable

750 Ohm

Cable TV

Company

See the Set-Up Guide also provided with
your TV set for further Cable TV connection
options and accessories.