Philips FW890P37 - Manual (Page 20)

CD
20
Warning!
1) This system is designed for
conventional CDs. Do not use any
accessories such as disc stabilizer
rings or CD treatment sheets, etc.,
which may damage the CD
mechanism.
2) Do not load more than one disc into
each tray.
3) When the CD changer is loaded
with CDs, do not turn over or shake
the system. This may jam the
changer.
You may load three discs in the CD
changer for continuous playback
without interruption.
Disc for playback
This system can playback all audio CD,
finalized audio CD-Recordable and finalized
audio CD-Rewritable format discs.
Knui KMUI
DIGITAL AUDIO DIGITAL AUDIO
Recordable
KMUI
DIGITAL AUDIO
IReWritablel
Loading the CD Changer
1 Press CD to select CD mode.
2 Press OPEN'CLOSE
The CD carousel slides out.
3 Load a CD with the printed side up in
the right tray.
• You can load another disc in the left
tray.
• To load the third disc, press the DISC
CHANGE button.
-* The CD carousel will rotate until the
empty tray is ready for loading.
4 Press OPEN*CLOSE to close the CD
carousel.
The total number of tracks and the
playing time of the last selected disc
appear on the display.
Note:
- To ensure good system performance,
wait until the CD changer completely
reads the discfsj before proceeding.
CD Direct Play
You can play a CD directly by pressing the
DISC 1, DISC 2 or DISC 3 button. The CD
player will stop at the end of playback of
the selected disc.
- A lit button indicates that a disc is
loaded in the disc tray.
Playing a CD
1
Press ► to start playback.
The disc tray, track number and
elapsed playing time of the current
track appear on the display.
The current track number will also be
flashing on the music calendar.
—^ When a track has been played, the
track number will be erased from the
music calendar.
• To interrupt playback, press I I .
The playing time flashes.
• To resume playback, press ► again.
2 To stop playback, press ■.
Note:
- All the available discs will play once,
then stop.
Disc Change
You can change the outer two discs while
the third inner disc is stopped or is playing.
1 Press DISC CHANGE
The CD carousel slides out.
2 Replace the discs in the left and right
disc trays.
• If you press DISC CHANGE again
during playback, the CD will stop
playing.
-* The CD carousel will rotate until the
inner tray is rotated out and is ready
for loading.
3 Press OPEN'CLOSE to close the CD
compartment.