Cabletron Systems 520 - Manual (Page 68)

Supporting ISDN for the SSR-510
5-2
Ordering Your ISDN Line
You should order your basic rate ISDN service from your local telephone
company or PTT. When you order your ISDN service, request 64K circuit-
switched data on your “B” channels. The router does not support voice
services.
Table 5-1 lists the possible value for basic rate ISDN parameters. The
telephone company will provide you with the ISDN configuration parameter
settings for your service. You will need these to properly configure the router
for ISDN operation.
Table 5-1. Possible Values for ISDN Parameters
ISDN
Configuration
Parameter Possible Values
Switch Type • INS64 (Japan)
• VN3
• NET3
• AUSTEL - Australian Telecom TS.014
• 5ESS (AT&T custom for 5ESS local office exchange)
• DMS100 - Northern Telecom custom
• NI1 - National ISDN-1, deployed by several vendors on
their switches
TEI Usually has a default value of auto.
Local Number The number to call for your basic rate interface.
Directory
Number(s) Optional; these are normally the same as the Local Number
plus one alternate number that also reaches you.