Configuring the router, Overview, Chapter contents – Cabletron Systems 520 User Manual
Page 47: Overview -1 chapter contents -1, Chapter 4

4-1
Chapter 4
Configuring the Router
Overview
There are two ways to configure the router. The first and recommended way
is to invoke the clearVISN Router Configurator. The clearVISN Router
Configurator creates a configuration for the router. It allows the Router
Configurator and EasyStart to load that configuration into the router. The
second way is to manually configure the router using menus and the
Command Line Interface (CLI).
Examples of the setup screen displays are provided in this section to aid in the
description of the console port and to display the options that are available.
Because they are examples only, the displays can vary slightly from the actual
screen displays on your console port device. Boldface type in the screen
display examples indicates user input.
Chapter Contents
Topic
Page
Using the Router Configurator to Configure the Router
Using the CLI to Manually Configure the Router