Winco Mfg. 8450D1 - Multi-Task Table with Drawers - Manual (Page 2)

Page 2 of 4
006150 Revision P Date 06-06-12 JWC
Model 8450 only:
6. Load paper roll onto Paper Holder Rod by removing one of the white plastic caps on the Paper Holder
Rod. Pull rod out of one Paper Rod Clamp and insert through paper roll. Feed rod back into Paper Rod
Clamp and replace white plastic cap.
Vinyl Strap Adjustment – Should the vinyl strap on your Winco table need to be adjusted, unscrew the screw
that currently holds either side of it in place. Pierce another hole in the strap to give desired tension and re-
insert screw.
Parts Reference
Visit our website www.wincomfg.com/product-documents/parts-lists
for a complete parts list of your table or
call Customer Service @ 1-800-237-3377 to request it by mail.
Do not over tighten nuts and bolts. Periodically recheck all fasteners for tightness.