Operating instructions – Winco Mfg. 6950 - Extra Large Swing Away Arm CareCliner User Manual
Page 9
OPERATING INSTRUCTIONS
8
TO POSITION SIDE TABLES
(FIG.1)
1. To raise table, grasp center of table and gently
raise into place. Table will automatically lock into
place when released.
2. To lower table, grasp table at the center, raise and
pivot down in one movement.
PIVOT TABLE
(FIG.3)
“Lap" Position
1. To place pivot-table in “lap” position, pivot the
table away from chair and pull over lap.
2. Tighten star-knob to secure the pivot-table in the
lap position
“Exit” Position
1. With the table in the “lap” position, loosen star
knob & push table away to exit chair.
Remove Pivot-Table
1. Loosen pivot-table star knob
2. Pull up on pivot-table until the table stem comes
out of the black bracket.
FIG. 2
FIG. 1
DO NOT lean or sit on side tables.
Tables may break and cause injury.
DO NOT allow patients to raise from chair using
side tables.
- 6940 - Swing Away Arm CareCliner 6910 - Extra Large Elite CareCliner 6900 - Elite CareCliner 6750 - XL Swing Away Arm Recliner 6740 - Swing-away Arm Designer Care Cliner 6710/6714 - XL Designer Care Cliner 6700/6704 - Designer Care Cliner 6570/6571 - Drop Arm XL CareCliner 6550/6551 - Drop Arm CareCliner 6540/6541 - CareCliner 6530/6531 - CareCliner