Compaq 110 - Manual (Page 84)

5–16 Maintenance and Service Guide
Removal and Replacement Procedures
6. Position the computer with the front facing you.
7. Open the computer.
8. Remove the M2.5 × 4.5 screw securing the display ground
cable to the base enclosure 1 (Figure 5-10).
9. Disconnect the display video cable 2.
10. Remove the four M2.5 × 7 screws securing the display hinges
to the base enclosure 3.
Figure 5–10: Removing the Display
11. Remove the display.
Reverse the above procedure to install the display.
238850-003.book Page 16 Friday, December 21, 2001 2:53 PM