Vexilar LC-507 - Manual (Page 6)

6
MOUNTING THE TRANSDUCERS
Before you mount the transducers, you need to decide which
method is best for you and your boat. Your options are transom
mounted, in-hull mounted, trolling motor mounted, or portable.
TRANSOM MOUNTING
Locate the transducers, and bracket
hardware. Each transducer has a mount-
ing bracket assembly which includes;
2 Angle Brackets
4 Bracket Screws
4 Washers
4 Nuts
4 Mounting Screws
Attach the bracket to the transducer as shown in Figure 5. The
flanges of the bracket normally point outward, away from the trans-
ducer. If mounting space is tight, you can reverse the angle brack-
ets and face the flanges inward.
Locate a spot
for each trans-
ducer similar to
the one in figure
6. Keep in mind
that you need
clear water flow
across the face of
the transducers
to insure a clear
reading at all
speeds. Stay
away from rivets,
ribs, or strakes
that would be
Figure 5
Figure 6
Figure 5