Vexilar LC-507 - Manual (Page 19)

19
TEMP-UNIT
This feature lets you choose between Celsius and Fahrenheit.
Press the Down arrow button to move down to the item. Then, press
the Left or Right arrow buttons to change the unit of measure. A
temperature reading will appear on the screen whenever there is a
temperature probe plugged in.
TEMP-CALIB
This feature allows you to calibrate the temperature reading, if
necessary. Press the down arrow button to move down to the fea-
ture. Then, press the Right or Left button to increase or decrease the
current value, indicated at the bottom of the menu screen.
SPEED
This turns the speed indicator on and off. Press the down arrow
button to move down to the item. Then, press the Left or Right arrow
buttons to change the setting.
SPEED-UNIT
This feature lets you choose between Miles Per Hour, Kilometers
Per Hour, and Knots. Press the Down arrow button to move down
to the item. Then, press the Left or Right arrow buttons to change
the unit of measure.
SPEED-PULSE
This feature allows you to calibrate the speed reading, if neces-
sary. See the Trouble Shooting guide.
VOLT-CALIB
This feature allows you to calibrate the voltage reading, if nec-
essary.
SYSTEM-RESET
System Reset will revert all setting back to the factory originals.