VACUUBRAND CVC 2II - Manual (Page 22)

page 22 of 36
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check
carefully the validity of this document with respect to his product. manual-no.: 997835 / 15/12/2009
General view basic setup VACUU•LAN
connect cooling
water valve
setting process parameters
➨ pressure value (condition for automatic shut down)
➨ upper set point (condition for restart)
➨ time for automatic shut down
setting the basic setup
basic setup VACUU•LAN
yes
no
switching cooling
water valve?
start: pump down
☞ ☞ ☞ ☞ ☞ The pump (and the cooling water valve if applicable) is
switched off if the pressure is below the lower pressure
value longer than the time for automatic shut down.
☞ ☞ ☞ ☞ ☞ The pump starts automatically if the pressure is higher
than the upper set point.